Account
Contact Us
 
AMOT Offices

Customer Service - Americas
Tel: +1 888 566 2668

Customer Service - Europe, Middle East and Africa
Tel: +44 1284 715739

Customer Service - Asia Pacific
Tel: +86 21 5910 4052

Customer Service - Germany
Tel: +49 40 8537 1298

Customer Service - India
Tel: +91 77100 26802

Send us a Message


 
International Distributors Find a Local Distributor
 

8072E Bulkhead Mount Controller

SKU 8072E

The 8072E Bulkhead Mount Controller offers position control of electrically or electro-pneumatically actuated valves. The 8072E Controller is primarily used with AMOT type G Temperature Control Valve.

Note: This product replaces other versions of 8072

Features and Benefits

  • Fully programmable PID-based control - allows easy system configuration
  • Available in AC and DC versions to suit a wide range of actuators
  • Universal inputs - RTD’s, thermocouple, 0-10V, or standard 4-20mA signal gives maximum system design flexibility
  • Can be operated in manual mode - easy maintenance and set up
  • Max. two programmable analogue outputs
  • Two programmable setpoints, two parameter sets
  • Four limit comparators
  • Two timer functions
  • Two self-optimization procedures
  • RS485 interface available as an option
Specifications
Controller type: Fully configurable PID with digital filtering and selectable parameter sets
Input: Universal sensor input 2 or 3 wire RTD, TC, 4-20mA selectable
Input sensing range: Selectable as required Maximum -200 to +850°C
(-328 to 1562°F) Typical setting: 0° to 120°C
Supply:

93 to 263 VAC, 48 to 63Hz 13VA max
20-30VDC, 13VA max

Input accuracy: RTD within 0.05%
TC within 0.25%
4-20mA & 0-10V within 0.1%
Input sampling: 50 to 250ms interval (user configurable)
Dynamic resolution up to 16 bit
Environmental: 0 to +50°C operational -40 to +70°C (40 - 158°F) storage RH<90% (non condensing)
Solid State Relays

50A rated, opto-isolated, zero-cross switching (4758L001)
7A rated, opto-isolated (47581L002)

Applications

8072E bulkhead mount controller can be used in engines, turbines, gear boxes and heat exchangers for the following applications:

  • charge air cooling
  • secondary cooling systems
  • fuel and lube oil preheating
  • co-generation
  • engine jacket water
Operation

These products are designed for high performance, fully configurable operation and are easy to install/set up. The controller is available in two options.

8071D
The 8071D is a universal PID controller for use with the AMOT electrically actuated G-Valve range. The 8071D is a panel mount stand-alone controller, designed to be used with separate solid state relays (SSRs).

8072E
The 8072E is a stand-alone panel incorporating the 8071D controller. The 8072E is comprised of the 8071D controller and two SSRs, pre-wired in a wall mounting with a splash-proof enclosure approved to IP65.